1. Open the propane tank
   Turn the propane valve on top of the tank all the way open (counterclockwise).

2. Open the heater control box
   Lift the lid on the black heater box on the outside of the sauna.

3. Turn the gas knob to “Pilot”
   Push the knob in and rotate it to the Pilot position.

4. Hold the knob in
   Keep the knob pressed in with one hand.

5. Press the red igniter button
   While holding the knob in, press the red ignition button until you hear or see the heater ignite.

6. Keep holding for about 10–15 seconds
   This allows the pilot to stay lit.

7. Release the knob
   If the flame stays on, you’re good to go.

8. Close the heater box

9. Set the temperature and timer inside the sauna
   Turn the Temperature knob to your desired heat.
   Turn the Timer knob to start the sauna.

10. Wait for the sauna to heat up
    Expect about 30–45 minutes to reach full temperature.

If the Sauna Doesn’t Light

• Make sure the propane tank is open

• Wait 5 minutes before trying again

• Repeat the steps from the beginning